UCAM247 Home Security Cameras Support Center

Contact Us

Adding a camera to the app, Android version.

To add a camera to the app you should open the app, you will then see the message shown in the image below. Tap OK. 


Follow the instructions on the screen to connect the camera to your router over ethernet and power it up. Wait 2-3 minutes for the camera to power up, then tap Next.


Tap on Scan local network to locate the camera.


Select your camera from the list, enter the password, by default this will be admin all in lowercase and give the camera a name e.g. Garden, Drive etc. Then tap on OK. If you have changed the camera's password previously then you should enter the new password, not the default password.


You may now want to setup the WiFi on the camera, to do so click here.

You may also want to access the cameras full settings area, to do so click here.