Recording using a NAS drive monitoring program
The cameras can be used with monitoring software like Surveillance station as offered by Synology.
These program use their own motion detection and recording systems to record video direct to the NAS drive from the cameras live feed.
If you are looking to connect the camera to this this can be done by adding the camera as the model shown below. This is a different brand of camera however the settings are exactly the same for our camera.
“Y-CAM Bullet HD 720/1020 V2 p”
You will need to enter your cameras Username and Password and any other details requested by the program then follow the instructions on screen to finish adding the camera.
From here use the literature provided by the NAS manufacturer to complete the setup and use your new program.